0
Welcome!

ARROWS/BROADHEADS/COMPONENTS products

Displaying 1 - 15 of 15 Items
AAE MAX BOND GLUE 20 GRAM BOTTLE

AAE Max Bond glue is specifically formulated for our Max Hunter, Pro Max, Plastifletch (PM) and Max Stealth vanes. Max Bond is a high-viscosity liquid that is easy to work with and penetrates well when using our tough Elastimax material. Whether you are fletching carbon or aluminum, this is the toughest glue available. Use Max Bond on our Max Hunter, Pro Max, Plastifletch Max and Max Stealth vanes. If the vane has MAX in the name you should be using our Max Bond Glue. Max Bond glue also works well with Elite Plastifletch, WAV, and most other plastic vanes. .7 oz (20 grams)


On Hand: 82

Sold: 420

Part Number: 5065

Brand: AAE

Free Shipping

AAE MAXWELD PRIMER PEN

AAE’s MAXweld Primer Pen creates an amazing “Weld” between any Max material vane and the archers chosen arrow. Apply to the base of you Max vane with Max Bond glue.


On Hand: 22

Sold: 169

Part Number: 8052

Brand: AAE

Free Shipping

BLACK EAGLE BLACK INSERT GLUE

Black Eagle Arrows Rubber-Toughened Insert and Outsert Adhesive is fast drying and super strong. This adhesive works especially well bonding our inserts and outserts into our carbon shafts. When you shoot the highest quality shafts and components don't bond them with anything but the highest quality adhesive.


On Hand: 20

Sold: 38

Part Number: 500045

Brand: BLACK EAGLE

Free Shipping

AAE MAX CLEAN WIPES 10 PACK

AAE’s Max Clean Arrow Wipes are a quick and easy method of cleaning arrow shafts for proper fletching adhesion. No more spilling liquids or smelly chemicals in your house or shop when prepping arrow for new shaft or re-fletching projects! Max Clean Arrow Wipes can be used on all forms of carbon, aluminum, and crested arrow. 10 count packs.


On Hand: 15

Sold: 96

Part Number: 8053

Brand: AAE

Free Shipping

BOHNING HOT MELT (3 INCH) STICK

Ferr-L-Tite was Bohning's first product, developed in 1946, and has been the archery industry's standard ever since! This hot melt adhesive is designed for points, inserts, and outserts on wood and aluminum shafts (for carbon, we recommend Ferr-L-Tite Cool Flex). It requires an open flame for installation or removal and is fully cured as soon as it reaches room temperature (about 5 minutes). Ferr-L-Tite is heat reversible on aluminum shafts - flame required. It has a melting point of 350 F (176.7C). Available in 12 gram sticks and 1 pound bricks. No expiration. Certified Crossbow Compatible.


On Hand: 7

Sold: 38

Part Number: 100227

Brand: BOHNING

Free Shipping

BOHNING COOL MELT BLUE (3 INCH) STICK

Ferr-L-Tite Cool Flex is designed for points, inserts, outserts, and pin bushings on carbon shafts. This hot melt adhesive has flexible properties which keep it from cracking even after repeated target impacts. Cool Flex is a must for carbon shafts, but it also works great on aluminum and fiberglass. It requires a flame for installation, but just use HOT WATER for easy adjustment, replacement, or removal of points, inserts, outserts, and pin bushings. Cool Flex is fully cured as soon as it reaches room temperature (about 5 minutes), and its melting point is 280F (137.8C). Available in 12 gram sticks and 1 pound bricks. No expiration. Certified Crossbow Compatible.


On Hand: 6

Sold: 35

Part Number: 6381

Brand: BOHNING

Free Shipping

ARIZONA EZ FLETCH MINI RIGHT WING BLUE

The Mini E-Z fletch is designed to fletch any carbon or aluminum arrow from Ultra Micro diameter all the way up to 5/16″ standard diameter. This tool will fletch vanes or feathers up to 2.25″ long. This tool gives a strong right helical for maximum broadhead stabilization and accuracy. Accomodates arrows up 5/16″ in diameter Fletchs vanes or feathers up to 2.25″ long Right helical Accomodates Ultra Micro diameter arrows


On Hand: 5

Sold: 28

Part Number: 1978

Brand: ARIZONA EZ

Free Shipping

BITZENBURGER FLETCHER RIGHT

Includes right nock receiver and right helical clamp.


On Hand: 5

Sold: 85

Part Number: 1962

Brand: LANCASTER

Free Shipping

DCA CUSTOM ARROWS VANE ANGLE TOOL

Use this patent-pending tool to precisely set up your Bitzenburger fletching jig to the desired helical (or offset) angle The wrap shows angles from 0 - 6 degrees left or right and is attached to a 7" section of 0.204 ID arrow and includes a nock Just place an arrow in the clamp, turn the nock so that the bottom corner of the vane is in the crosshair as shown, and adjust the dials on the jig This works with the straight and helical clamp The helical clamp actually puts the vane on straight, it just follows the curvature of the arrow better Simple, precise, and highly effective


On Hand: 4

Sold: 24

Part Number: 8530017

Brand: LANCASTER

Free Shipping

ARIZONA EZ FLETCH PRO ALUMINUM GREEN

The Offset Pro E-Z fletch is designed to fletch any carbon or aluminum arrow from 5/16″ standard diameter all the way up to 26/64″ standard diameter. This tool will fletch vanes or feathers up to 5″ long. This tool is popular for crossbows shooters who need better fletching clearance than a strong helical gives. Accomodates arrows up 26/64″ in diameter Fletchs vanes or feathers up to 5″ long Right offset Accomodates down to 5/16″ diameter arrow


On Hand: 3

Sold: 15

Part Number: RT1

Brand: ARIZONA EZ

Free Shipping

BITZENBURGER CLAMP ONLY RIGHT

For true right helical fletching


On Hand: 3

Sold: 11

Part Number: 3655

Brand: BITZENBURGER

Free Shipping

PINE RIDGE ARROW INSPECTOR

If they don't spin right, they won't fly right! The Arrow InspectorTM is a precision instrument designed to help insure a smooth and accurate arrow flight. As bows increase in speed, accuracy becomes more and more critical. Use of the Arrow InspectorTM will increase accuracy and is essential when gluing outserts/ point adapters on carbon fiber arrows. The Arrow InspectorTM will check, with precise accuracy, arrow shaft straightness, broadhead balance and straightness, nock alignment and vane and feather balance. The Arrow InspectorTM features low friction machine cut steel axles and precision cut aluminum wheels - to detect even the slightest bend in an arrow shaft or unbalanced arrow. This tool is essential when gluing hidden inserts, outserts and nocks on carbon fiber arrows after applying epoxy so they can be easily aligned for perfect balance every time. Ideal for hunters, target and 3D shooters and archers who fletch their own arrows. A quick spin on The Arrow InspectorTM will let you know if you can trust that arrow and field point or broadhead for a straight, accurate shot.


On Hand: 2

Sold: 22

Part Number: 2500

Brand: PINE RIDGE ARCHERY

Free Shipping

BITZENBURGER CLAMP ONLY LEFT

For true left helical fletching


On Hand: 2

Sold: 22

Part Number: 101320

Brand: BITZENBURGER

Free Shipping

TAC Primer Pen - .34 fl oz.

0.34 fl. oz. aluminum pen applicator For use with all TAC Vanes Cleans and prepares the vane for maximum glue penetration Adhesion guaranteed on TAC Vanes fletchings when you use TAC Vanes Primer Pen with TAC Vanes Glue


On Hand: 2

Sold: 25

Part Number: 80TAC-0016100-1151

Brand: SWHACKER

Free Shipping

Displaying 1 - 15 of 15 Items